Tiger Mowers 5085M-105M Manual do Utilizador

PARTS LISTING WITHMOUNTING AND OPERATINGINSTRUCTIONSSIDE FLAILASSEMBLIESJD 5065M / JD 5085M-105MCAB06010007Tiger Corporation3301 N. Louise Ave.Sioux F

Side & Rear flail Safety Section 1-4SAFETYDANGER!Never allow children or other persons to ride on the Tractor or Implement.Falling off can resul

MAINTENANCESide and Rear Flail Maintenance Section 4-12©2011 Alamo Group Inc.MAINTENANCEGREASING THE UPPER AND LOWER SHEAVESLocate the grease zerks on

MAINTENANCESide and Rear Flail Maintenance Section 4-13©2011 Alamo Group Inc.MAINTENANCEWith the cutter head lowered, locate the grease zerkson the li

MAINTENANCESide and Rear Flail Maintenance Section 4-14©2011 Alamo Group Inc.MAINTENANCEDRIVE SHAFT YOKE, U-JOINT STUB SHAFTWith engine stopped, injec

MAINTENANCESide and Rear Flail Maintenance Section 4-15©2011 Alamo Group Inc.MAINTENANCEADJUSTING THE CUTTING HEIGHTLoosen the four ground roller brac

MAINTENANCESide and Rear Flail Maintenance Section 4-16©2011 Alamo Group Inc.MAINTENANCEGREASING CUTTER SHAFT-FLAIL MOWERSLocate grease zerks on each

MAINTENANCESide and Rear Flail Maintenance Section 4-17©2011 Alamo Group Inc.MAINTENANCEIDLER TENSIONLocate the idler tensioning rod for each flail. L

MAINTENANCESide and Rear Flail Maintenance Section 4-18©2011 Alamo Group Inc.MAINTENANCEROSTA TENSIONERSTANDARD DUTY REAR FLAILSRemove the shield guar

MAINTENANCESide and Rear Flail Maintenance Section 4-19©2011 Alamo Group Inc.MAINTENANCETENSIONER MEASUREMENT PROCEDURE1. Measure the Belt Span (SEE S

MAINTENANCESide and Rear Flail Maintenance Section 4-20©2011 Alamo Group Inc.MAINTENANCEREVERSING MOWER ROTATION OF SIDE FLAIL MOWERSTo reverse the ro

MAINTENANCESide and Rear Flail Maintenance Section 4-21©2011 Alamo Group Inc.MAINTENANCEREVERSING MOWER ROTATION OF SD REAR FLAIL MOWERSRemove the shi

Side & Rear flail Safety Section 1-5SAFETYWARNING!Transport only at safe speeds. Serious accidents and injuriescan result from operating this

MAINTENANCESide and Rear Flail Maintenance Section 4-22©2011 Alamo Group Inc.MAINTENANCEREVERSING MOWER ROTATION REAR MECHANICAL DRIVEN FLAIL MOWERSRe

MAINTENANCESide and Rear Flail Maintenance Section 4-23©2011 Alamo Group Inc.MAINTENANCEFlail Blades InspectionInspect the Blades daily for abnormal w

MAINTENANCESide and Rear Flail Maintenance Section 4-24©2011 Alamo Group Inc.MAINTENANCEBlade Pins and D-Ring InspectionBlade Pins and D-Rings daily f

MAINTENANCESide and Rear Flail Maintenance Section 4-25©2011 Alamo Group Inc.MAINTENANCEFlail Axe Blades InspectionInspect the Blades daily for abnorm

MAINTENANCESide and Rear Flail Maintenance Section 4-26©2011 Alamo Group Inc.MAINTENANCEFlail Axe Blade Bolt InspectionInspect Blade Bolts daily for w

MAINTENANCESide and Rear Flail Maintenance Section 4-27©2011 Alamo Group Inc.MAINTENANCE50” FLAIL KNIFE BLADE REPLACEMENT1. If knives are damaged or b

MAINTENANCESide and Rear Flail Maintenance Section 4-28©2011 Alamo Group Inc.MAINTENANCERECOMMENDED FILLING INSTRUCTIONS FOR REAR FLAIL GEARBOXWhen fi

MAINTENANCESide and Rear Flail Maintenance Section 4-29©2011 Alamo Group Inc.MAINTENANCEPAGE INTENSIONALLY LEFT BLANK

MAINTENANCESide and Rear Flail Maintenance Section 4-30©2011 Alamo Group Inc.MAINTENANCECUTTERSHAFT BEARING REPLACEMENT1. Remove existing cuttershaft,

MAINTENANCESide and Rear Flail Maintenance Section 4-31©2011 Alamo Group Inc.MAINTENANCE

Side & Rear flail Safety Section 1-6SAFETYWARNING! Never attempt to lubricate, adjust, or remove material from theImplement while it is in motio

MAINTENANCESide and Rear Flail Maintenance Section 4-32©2011 Alamo Group Inc.MAINTENANCEDAILY MAINTENANCE SCHEDULEThe following services should be per

PARTS SECTION JD 5XX5M - TSF

NOTES

PART NAME INDEXPARTS ORDERING GUIDE...

PARTS ORDERING GUIDE©2011 Alamo Group Inc. Parts Section 5-4JD5XX5M TSF

NOTES©2011 Alamo Group Inc. Parts Section 5-5JD5XX5M TSF

TRACTOR MOUNT KIT©2011 Alamo Group Inc. Parts Section 5-6JD5XX5M TSF

TRACTOR MOUNT KITContinued...ITEM PART NO. QTY. DESCRIPTION1 06300109 1 MAIN FRAME--- 06300124 1 MNFRM,LDR (LOADER MOUNT)2 06410898 1 UPRIGHT,LH3 0641

TRACTOR MOUNT KIT - HYDRAULICSITEM PART NO. QTY. DESCRIPTION1 23152 1 PUMP2 06370109 1 COUPLER3 06420118 1 DRV SHFT,23.75" (JD5095 - 5105M TRACTO

TRACTOR MOUNT KIT - HYDRAULICSContinued...ITEM PART NO. QTY. DESCRIPTION--- 06700091 1 TANK,RES,ASSY,WHEEL WELL9 06380015 1 TANK,RES,WHEEL WELL10 0650

Side & Rear flail Safety Section 1-7SAFETYDANGER!NEVER use drugs or alcohol immediately before or while operating theTractor and Implement. Dr

2 SPOOL CABLE CONTROL STAND©2011 Alamo Group Inc. Parts Section 5-10JD5XX5M TSF

2 SPOOL CABLE CONTROL STANDContinued...ITEM PART NO. QTY. DESCRIPTION1 31923 1 BRKT,CTRL,CBL2 6T1251 2 CBL CTRL BOX,180 DEG3 06510102 1 SWITCH BOX,SID

CABLE (MANUAL) LIFT VALVE - 2 SPOOL©2011 Alamo Group Inc. Parts Section 5-12JD5XX5M TSF

CABLE (MANUAL) LIFT VALVE - 2 SPOOLContinued...ITEM PART NO. QTY. DESCRIPTION1 24873 1 VALVE,2SP,HSC,OC2 06340033 1 VALVE MNT3 34622 1 PLATE,VALVE,REA

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 24873©2011 Alamo Group Inc. Parts Section 5-14JD5XX5M TSF

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 24873Continued...ITEM PART NO. QTY. DESCRIPTION1 TB1017S 1 INLET END COVER2 TB1701 1 END COVER,OPEN CENTER3 TF30

WHEEL SPACERITEM PART NO. QTY. DESCRIPTION1 06770025 1 KIT,SPCR,WHL,JD2 06400919 2 RING,SPACER,WHEEL,JD©2011 Alamo Group Inc. Parts Section 5-16JD5XX

HOSE GUIDE ON HD DRAFT BEAMITEM PART NO. QTY. DESCRIPTION1 28955D 1 HD COMBO DRAFT BEAM2 21627 2 NYLOCK NUT,3/8",NC3 06370164 1 HOSE GUIDE4 21632

NOTES 1©2011 Alamo Group Inc. Parts Section 5-18JD5XX5M TSF

COMMON SIDE FLAIL - SUPER DUTYPARTS SECTION

Side & Rear flail Safety Section 1-8SAFETYWARNING!Extreme care should be taken when operating near loose objects suchas gravel, rocks, wire, and

PART NAME INDEXPARTS ORDERING GUIDE...

PARTS ORDERING GUIDE©2011 Alamo Group Inc. Parts Section 6-4COMMON SIDE FLAIL - SD

NOTES©2011 Alamo Group Inc. Parts Section 6-5COMMON SIDE FLAIL - SD

COMBO DRAFT BEAM©2011 Alamo Group Inc. Parts Section 6-6COMMON SIDE FLAIL - SD

COMBO DRAFT BEAMContinued...ITEM PART NO. QTY. DESCRIPTION1 32143 1 COMBO DRAFT BEAM -STD DTY FLAIL2 6T0151R 1 HYD. CYLINDER 3” X 10”3 32215 1 HYD. CY

63IN SIDE FLAIL - STANDARD ROTATION©2011 Alamo Group Inc. Parts Section 6-8COMMON SIDE FLAIL - SD

63IN SIDE FLAIL - STANDARD ROTATIONContinued...ITEM PART NO. QTY. DESCRIPTION1 28647E 1 BONNET,63,STD,COMBO2 28665A 1 BAFFLE,63,STD ROT-STD3 6T2283 8

63IN SIDE FLAIL - REVERSE ROTATION©2011 Alamo Group Inc. Parts Section 6-10COMMON SIDE FLAIL - SD

63IN SIDE FLAIL - REVERSE ROTATIONContinued...ITEM PART NO. QTY. DESCRIPTION1 28647E 1 BONNET,63,STD,COMBO2 28969A 1 TRASH GUARD,63REV ROT-STD3 6T2283

Side & Rear flail Safety Section 1-9SAFETYDANGER!Flail Mowers are capable under adverse conditions of throwing objectsfor great distances (100 y

75IN SIDE FLAIL - STANDARD ROTATION©2011 Alamo Group Inc. Parts Section 6-12COMMON SIDE FLAIL - SD

75IN SIDE FLAIL - STANDARD ROTATIONContinued...ITEM PART NO. QTY. DESCRIPTION1 28736D 1 BONNET,75,STD,T3F,RT2 28737 1 BAFFLE,75,STD ROT-STD3 6T2283 8

75IN SIDE FLAIL - REVERSE ROTATION©2011 Alamo Group Inc. Parts Section 6-14COMMON SIDE FLAIL - SD

75IN SIDE FLAIL - REVERSE ROTATIONContinued...ITEM PART NO. QTY. DESCRIPTION1 28736D 1 BONNET,75,STD,T3F,RT2 28969A 1 TRASH GUARD,63REV ROT-STD3 6T228

SIDE FLAIL DRIVE ASSEMBLY©2011 Alamo Group Inc. Parts Section 6-16COMMON SIDE FLAIL - SD

SIDE FLAIL DRIVE ASSEMBLYContinued...ITEM PART NO. QTY. DESCRIPTION1 ------ - BONNET *REFER TO HEAD PARTS2 28679B 1 MOTOR CHANNEL3 21700 2 HEX NUT, 1/

3IN X 10IN HYDRAULIC CYLINDER BREAKDOWNITEM PART NO. QTY. DESCRIPTION ------ 6T0151R - HYD. CYLINDER 3" X 10"1 6T0167 1 CYLINDER BUTT2 6T017

3IN X 12IN HYDRAULIC CYLINDER BREAKDOWNITEM PART NO. QTY. DESCRIPTION ------ 32215 - HYD. CYLINDER 3" X 12"1 6T0167 1 CYLINDER BUTT2 6T0170

RESERVOIR TANK FILTER ASSEMBLYITEM PART NO. QTY. DESCRIPTION------ 06505044 - FILTER ASSY SAE 10 MICRON1 28583 4 CAPSCREW,8MM X 25MM(1.25 PITCH)2 0650

NOTES 2©2011 Alamo Group Inc. Parts Section 6-21COMMON SIDE FLAIL - SD

Side & Rear flail Safety Section 1-10SAFETYDANGER!Always disconnect the main PTO Driveline from the Tractor beforeperforming service on the Mowe

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 30198©2011 Alamo Group Inc. Parts Section 6-22COMMON SIDE FLAIL - SD

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 30198Continued...ITEM PART NO. QTY. DESCRIPTION1 TB1017S 1 INLET END COVER2 TB1702 1 END COVER, POWER BEYOND3 TF

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 30801©2011 Alamo Group Inc. Parts Section 6-24COMMON SIDE FLAIL - SD

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 30801Continued...ITEM PART NO. QTY. DESCRIPTION1 TB1017S 1 INLET END COVER2 TB1702 1 END COVER, POWER BEYOND3 TB

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31752©2011 Alamo Group Inc. Parts Section 6-26COMMON SIDE FLAIL - SD

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31752Continued...ITEM PART NO. QTY. DESCRIPTION1 TB1017S 1 INLET END COVER2 TB1702 1 END COVER, POWER BEYOND3 TB

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31320©2011 Alamo Group Inc. Parts Section 6-28COMMON SIDE FLAIL - SD

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31320Continued...ITEM PART NO. QTY. DESCRIPTION1 31595 1 INLET END COVER2 31594 1 END COVER, LOAD SENSE3 31597 1

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31322©2011 Alamo Group Inc. Parts Section 6-30COMMON SIDE FLAIL - SD

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 31322Continued...ITEM PART NO. QTY. DESCRIPTION1 31595 1 INLET END COVER2 31594 1 END COVER, LOAD SENSE3 31600 1

Side & Rear flail Safety Section 1-11SAFETYWARNING!In addition to the design and configuration of this Implement, including Safety Signs and Saf

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502040©2011 Alamo Group Inc. Parts Section 6-32COMMON SIDE FLAIL - SD

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502040Continued...ITEM PART NO. QTY. DESCRIPTION1 31595 1 INLET END COVER2 31594 1 END COVER, LOAD SENSE3 3159

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502042©2011 Alamo Group Inc. Parts Section 6-34COMMON SIDE FLAIL - SD

CABLE (MANUAL) LIFT VALVE BREAKDOWN - 06502042Continued...ITEM PART NO. QTY. DESCRIPTION1 31595 1 INLET END COVER2 31594 1 END COVER, LOAD SENSE3 3160

FRONT HYDRAULIC PUMP BREAKDOWNITEM PART NO. QTY. DESCRIPTION------ 23152 - PUMP ASSEMBLY 1 3/4” COMPLETE1 22765 1 SEAL2 22766 1 SHAFT END COVER3 2276

FLAIL MOTOR BREAKDOWNITEM PART NO. QTY. DESCRIPTION------ 06504013 - MOTOR ASSEMBLY 350 - TSF1 06504039 1 SHAFT END COVER2 06504040 1 PORT END COVER3

COOLER ASSEMBLY©2011 Alamo Group Inc. Parts Section 6-38COMMON SIDE FLAIL - SD

COOLER ASSEMBLYContinued...ITEM PART NO. QTY. DESCRIPTION1 21530 10 CAPSCREW,1/4 X1 NC2 21986 10 LOCKWASHER,1/43 22014 10 FLATWASHER,1/44 35176 10 1/4

BRAKE VALVE ASSEMBLYITEM PART NO. QTY. DESCRIPTION* 06510083 - BRAKE VALVE, ASSY1 34092 1 BRAKE VALVE, BLANK2 34094 2 LOGIC ELEMENT3 34095 1 RELIEF VA

BRAKE VALVE HYDRAULIC SCHEMATIC©2011 Alamo Group Inc. Parts Section 6-41COMMON SIDE FLAIL - SD

Side & Rear flail Safety Section 1-12SAFETY24028 MOWER DECK22839 MOWER DECK21405 MOWER DECK22840 INSIDE OF CABPART NO.LOCATION

SIDE FLAIL TRAVEL LOCKITEM PART NO. QTY. DESCRIPTION1 ------ - BONNET *REFER TO FLAIL ASSEMBLY2 30531A 1 BRACKET, TRAVEL LOCK3 TF4248 1 PLATE, TRAVEL

DRAFT BEAM TRAVEL LOCKITEM PART NO. QTY. DESCRIPTION1 32143 1 DRAFT BEAM2 6T0106 1 TRAVEL LOCK BRACKET3 21833 1 CAPSCREW 3/4” X 2 1/4”4 ------ - MAIN

SWITCH BOXITEM PART NO. QTY. DESCRIPTION1 06514013 1 SWBX,ALUM,BLK,065101022 35226 1 SWITCH,MOWER,COLEHERSEE3 33811 1 SWITCH,MASTER/DECK FLOAT4 6T3923

SWITCH BOX SCHEMATIC©2011 Alamo Group Inc. Parts Section 6-45COMMON SIDE FLAIL - SD

NOTES 3©2011 Alamo Group Inc. Parts Section 6-46COMMON SIDE FLAIL - SD

FIRE SUPRESSION SYSTEM©2011 Alamo Group Inc. Parts Section 6-47COMMON SIDE FLAIL - SD

FIRE SUPRESSION SYSTEM PARTS©2011 Alamo Group Inc. Parts Section 6-48COMMON SIDE FLAIL - SD

FIRE SUPRESSION SYSTEM PARTSContinued...ITEM PART NO. QTY. DESCRIPTION1 06520357 1 TANK,FIRE SUPRESS SYS,RAILKUT2 06520358 1 MNT,TANK,FIRE KIT,RAILKUT

FIRE SUPRESSION SYSTEM ELECTRICAL SCHEMATIC©2011 Alamo Group Inc. Parts Section 6-50COMMON SIDE FLAIL - SD

WETCUT©2011 Alamo Group Inc. Parts Section 6-51COMMON SIDE FLAIL - SD

Side & Rear flail Safety Section 1-13SAFETY42350 MOWER DECK33743 INSIDE OF CAB10” x 5.5” 31522 MOWER DECK18.25” x10” 31523 HYDRAULI

WETCUT 50 GALLON TANK MOUNTITEM PART NO. QTY. DESCRIPTION1 06370128 1 MNT,3PNT,UNI2 06370136 1 MNT,TANK,50GAL,WETCUT4 06520342 1 TANK,50GA.,WETCUT7 RD

WETCUT 100 OR 150 GALLON TANK MOUNTITEM PART NO. QTY. DESCRIPTION1 06370128 1 MNT,3PNT,UNI2 06370138 1 MNT,TANK,100GAL,WETCUT------ 06370139 - MNT,TAN

WETCUT TANK PLUMBING©2011 Alamo Group Inc. Parts Section 6-54COMMON SIDE FLAIL - SD

WETCUT TANK PLUMBINGContinued...ITEM PART NO. QTY. DESCRIPTION1 06370128 1 MNT,3PNT,UNI2 06520336 1 CNTRLR,SENSOR,065203333 06520341 1 PUMP,WETCUT4 06

WETCUT SPRAYER HEAD ASSEMBLY©2011 Alamo Group Inc. Parts Section 6-56COMMON SIDE FLAIL - SD

WETCUT SPRAYER HEAD ASSEMBLYContinued...ITEM PART NO. QTY. DESCRIPTION1 06370105 1 HOOD,SPRAYER2 06370106 1 HINGE,LH,SPRAYER3 06370107 1 HINGE,RH,SPRA

WETCUT CABLES©2011 Alamo Group Inc. Parts Section 6-58COMMON SIDE FLAIL - SD

WARRANTYSECTIONWarranty Section 7-1

.

WARRANTY INFORMATIONTiger Corporation, 3301 N. Louise, Sioux Falls, South Dakota, warrants to theoriginal Retail Customer, the new Tiger equipment is

TO THE OWNER / OPERATOR / DEALERAll implements with moving parts are potentially hazardous. There is no substitute for a cautious,safe-minded operat

Side & Rear flail Safety Section 1-14SAFETY6T3217 MOWER DECK42399 MOWER DECK6T3219 INSIDE OF CAB6T3220FRONT PUMP MOUNTPART NO.LOCATION4

ONE LAST WORDThis manual cannot possibly cover all of thepotentially hazardous situations you willencounter. By being familiar with thesafety rules,

TO THE OWNER / OPERATOR / DEALERTo keep your implement running efficiently and safely, read your manual thoroughly and followthese directions and the

Printed in USA© Tiger Corporation

Side & Rear flail Safety Section 1-15SAFETY6T3223 INSIDE OF CAB6T3224 MOWER DECK6T3221 INSIDE OF CAB6T3222 INSIDE OF CABPART

Side & Rear flail Safety Section 1-16SAFETY6T3243 INSIDE OF CAB6T3236 MOWER DECK HYDRAULIC TANK6T3233 HYDRAULIC TANK6T3234 INSI

Side & Rear flail Safety Section 1-17SAFETY34852 HYDRAULIC TANK06550054 ON MOWER HEAD

Side & Rear flail Safety Section 1-18SAFETYITEM PART NO. QTY. DESCRIPTION50023 AVAIL MANUAL CANISTER COMPLETE1 00776031 1 ROUND MANUAL CANISTER3

Side & Rear flail Safety Section 1-19SAFETYThis section is intended to explain in broad terms the concept and effect of federal laws and regulat

Side & Rear flail Safety Section 1-20SAFETY

Assembly Section 2-1ASSEMBLY SECTIONJD5XX5M - TSF

ASSEMBLYAssembly Section 2-2Before attempting to mount your Tiger mower, it isimportant to read an understand all of the Safety Messages inthe Safety

ASSEMBLYAssembly Section 2-3CRANKSHAFT ACCESSTo access the crankshaft of the JD5065M and 5085-105M, a hole will need to be cut in the front of the tra

FORWARDThis manual contains information about many features of the Tiger mowingand roadside maintenance equipment. Some of these include: Safety pr

ASSEMBLYAssembly Section 2-4CRANKSHAFT ACCESS (continued)Find the center punched marking on the front end of the tractor(shown below), and use it as a

ASSEMBLYAssembly Section 2-5DRIVESHAFT & FRONT PUMP MOUNTINGThread the pump drive shaft into the crankshaft adapter.Slide splined drive shaft coup

ASSEMBLYAssembly Section 2-6CABLE CONTROL LEVER STANDPlace the cable control bracket on the floor so that the bracket is 2-1/2” from the side edge of

ASSEMBLYAssembly Section 2-7SWITCH BOX WIRINGRoute the green wires and the red wire (with the 10amp fuse) from the switchbox to the front console pane

ASSEMBLYAssembly Section 2-8WEATHER-PACK/METRI-PACK ASSEMBLYThese instructions apply to both Weather-Pack and Metri-pack connectors.NOTE: Use the spec

ASSEMBLYAssembly Section 2-9VALVE MOUNTINGAttach the rear valve mounting bracket to the fender of the tractor by removing the two rear bolts on the le

ASSEMBLYAssembly Section 2-10PRESSURE LINE INSTALLATIONThe hydraulic pressure line will be plumbed into the tractors power beyond port. Locate the po

ASSEMBLYAssembly Section 2-11MANUAL LIFT VALVE PORTS (ASM-C-0057)MANUAL SWITCH BOX MOUNTING The switch box is to be secured to the operators side of

ASSEMBLYAssembly Section 2-12*NOTE ON HUSCO CONTROL VALVES*Manual, cable controlled (Husco control valve) boom mowers require check valves with integr

ASSEMBLYAssembly Section 2-13HOSE AND WIRE ROUTINGAttach two clamps to the right rear wheel well for proper hose/wire routing. Drill one hole for eac

ASSEMBLYAssembly Section 2-14FENDER CUT FOR WHEEL WELL TANK A notch will have to be cut into the left rear fender to allow room for the hydraulic tan

ASSEMBLYAssembly Section 2-15mast, and to the flail mowers. The hoses may get into the front and/or rear tires if not properly routed and clamped.

ASSEMBLYAssembly Section 2-16requirements.(ASM-C-0004hydro resrv)WHEEL SPACER WITH WHEEL WELL TANKWhen the left wheel is off, a spacer kit is needed w

ASSEMBLYAssembly Section 2-17GENERAL HOSE INSTALLATIONRefer to the parts section for detailed information about hoses and fittings for this applicatio

ASSEMBLYAssembly Section 2-18chart located in the maintenance section of this manual.(ASM-JD-0072).SIDE MOWER HYDRAULIC DIAGRAM(ASM-C-0090)

ASSEMBLYAssembly Section 2-19CONTINUOUS DUTY SOLENOID SWITCHMount the solenoid switch, drill holes to match if necessary, mount in dry and well protec

ASSEMBLYAssembly Section 2-20CONTINUOUS DUTY SOLENOID SWITCH(MOUNTING) (ASM-JD-0096)

ASSEMBLYAssembly Section 2-21DRAFT BEAM INSTALLATIONInstall ½” O-ring breather into butt port of inboard cylinder. Install fittings in the rod end o

ASSEMBLYAssembly Section 2-22MOWER MOUNTINGCheck that all grease zerks have been installed in the draft beams pivot arm, left linkage arm, right linka

ASSEMBLYAssembly Section 2-23TRAVEL LOCK MOUNTINGInstall the travel lock bracket with pin and clip on the draft beam. Slide the draft beam and align t

TABLE OF CONTENTSSAFETY SECTION_____________________________________ 1ASSEMBLY / MOUNTING SECTION______________________ 2OPERATION SECTION____________

ASSEMBLYAssembly Section 2-24STOP BOLT ADJUSTMENTExtend the outboard cylinder all the way out. Adjust the stop adjustment bolt (located on the top o

ASSEMBLYAssembly Section 2-25FINAL PREPARATION FOR OPERATIONPlace operators safety and operation decals on the steering column and side counsel where

ASSEMBLYAssembly Section 2-26

Operation Section 3-1© 2011 Alamo Group Inc.OPERATION SECTION

OPERATIONSide and Rear Flail Operation Section 3-2© 2011 Alamo Group Inc.OPERATION TIGER SIDE AND REAR FLAIL MOWER OPERATING INSTRUCTIONSTiger Si

OPERATIONSide and Rear Flail Operation Section 3-3© 2011 Alamo Group Inc.OPERATION1. OPERATOR REQUIREMENTSSafe operation of the unit is the responsibi

OPERATIONSide and Rear Flail Operation Section 3-4© 2011 Alamo Group Inc.OPERATION2. TRACTOR REQUIREMENTSThe tractor used to operate the mower must ha

OPERATIONSide and Rear Flail Operation Section 3-5© 2011 Alamo Group Inc.OPERATION2.4 Front End WeightMaintain a minimum of 20% total tractor weight o

OPERATIONSide and Rear Flail Operation Section 3-6© 2011 Alamo Group Inc.OPERATION3.1 Boarding the TractorUse both hands and equipped handrails and st

OPERATIONSide and Rear Flail Operation Section 3-7© 2011 Alamo Group Inc.OPERATION4. STARTING THE TRACTORThe operator must have a complete understandi

OPERATIONSide and Rear Flail Operation Section 3-8© 2011 Alamo Group Inc.OPERATION5.1 Connecting the Rear Flail to the Tractor1. Make sure the tractor

OPERATIONSide and Rear Flail Operation Section 3-9© 2011 Alamo Group Inc.OPERATION5.2 Connecting the Side Flails to the Tractor1. Install the Draft Be

OPERATIONSide and Rear Flail Operation Section 3-10© 2011 Alamo Group Inc.OPERATION6.1 Roller Height Adjustment1. The mower’s cutting height is set by

OPERATIONSide and Rear Flail Operation Section 3-11© 2011 Alamo Group Inc.OPERATIONSet cutting height according to procedures above for remaining two

OPERATIONSide and Rear Flail Operation Section 3-12© 2011 Alamo Group Inc.OPERATION7.1 Driveline Length CheckWhen fitting the mower to the tractor, th

OPERATIONSide and Rear Flail Operation Section 3-13© 2011 Alamo Group Inc.OPERATIONShorten the driveline profiles as follows:• Remove the driveline fr

OPERATIONSide and Rear Flail Operation Section 3-14© 2011 Alamo Group Inc.OPERATIONDO NOT allow any person under a folded wing unless wing is securely

OPERATIONSide and Rear Flail Operation Section 3-15© 2011 Alamo Group Inc.OPERATION8.2 Mower Pre-Operation Inspection/ServiceBefore each mower use, a

OPERATIONSide and Rear Flail Operation Section 3-16© 2011 Alamo Group Inc.OPERATION• Ensure rubber deflectors are in position and not damaged. Replace

OPERATIONSide and Rear Flail Operation Section 3-17© 2011 Alamo Group Inc.OPERATION• Inspect cutter knives and knife pins for looseness and excessive

Side & Rear flail Safety Section 1-1SAFETYSAFETYSECTION

OPERATIONSide and Rear Flail Operation Section 3-18© 2011 Alamo Group Inc.OPERATIONFlail Mower PRE-OPERATION InspectionMower ID#________________ Make

OPERATIONSide and Rear Flail Operation Section 3-19© 2011 Alamo Group Inc.OPERATIONTractor PRE-OPERATION InspectionMower ID#________________ Make ____

OPERATIONSide and Rear Flail Operation Section 3-20© 2011 Alamo Group Inc.OPERATION9. DRIVING THE TRACTOR AND IMPLEMENTSafe tractor transport requires

OPERATIONSide and Rear Flail Operation Section 3-21© 2011 Alamo Group Inc.OPERATIONRaising the Mower9.1 Starting the TractorThe procedure to start the

OPERATIONSide and Rear Flail Operation Section 3-22© 2011 Alamo Group Inc.OPERATIONUsing the tractor 3-point hitch control lever, raisethe mower off t

OPERATIONSide and Rear Flail Operation Section 3-23© 2011 Alamo Group Inc.OPERATION9.4 Crossing Ditches and Steep InclinesWhen crossing ditches with s

OPERATIONSide and Rear Flail Operation Section 3-24© 2011 Alamo Group Inc.OPERATIONInclines and ditches should be approached along aline which is at a

OPERATIONSide and Rear Flail Operation Section 3-25© 2011 Alamo Group Inc.OPERATIONMany varied objects, such as wire, cable, rope, or chains, can beco

OPERATIONSide and Rear Flail Operation Section 3-26© 2011 Alamo Group Inc.OPERATIONFlail Mowers are capable under adverse conditions of throwingobject

OPERATIONSide and Rear Flail Operation Section 3-27© 2011 Alamo Group Inc.OPERATION10.4 PTO RPM and Ground SpeedGround speed for mowing will depend up

Side & Rear flail Safety Section 1-2SAFETYIndicates an imminently hazardous situation that, if not avoided, WILL result in DEATHOR VERY SERIOUS

OPERATIONSide and Rear Flail Operation Section 3-28© 2011 Alamo Group Inc.OPERATIONDo not mow with two machines in the same area except with Cab tract

OPERATIONSide and Rear Flail Operation Section 3-29© 2011 Alamo Group Inc.OPERATION10.6 Shutting Down the ImplementTo shut down the implement, first b

OPERATIONSide and Rear Flail Operation Section 3-30© 2011 Alamo Group Inc.OPERATIONNever stand or allow another person to stand between a running Trac

OPERATIONSide and Rear Flail Operation Section 3-31© 2011 Alamo Group Inc.OPERATION12. MOWER STORAGEIt is recommended that the mower be stored with th

OPERATIONSide and Rear Flail Operation Section 3-32© 2011 Alamo Group Inc.OPERATION13. TRANSPORTING THE TRACTOR AND IMPLEMENTInherent hazards of opera

OPERATIONSide and Rear Flail Operation Section 3-33© 2011 Alamo Group Inc.OPERATIONIf the tractor’s hydraulic pump is not independent of the tractor P

OPERATIONSide and Rear Flail Operation Section 3-34© 2011 Alamo Group Inc.OPERATIONMake certain that the “Slow Moving Vehicle” (SMV) sign is installed

OPERATIONSide and Rear Flail Operation Section 3-35© 2011 Alamo Group Inc.OPERATIONReduce speed before turning or applying the brakes.Ensure that both

OPERATIONSide and Rear Flail Operation Section 3-36© 2011 Alamo Group Inc.OPERATION

Maintenance Section 4-1©2011 Alamo Group Inc.MAINTENANCE SECTION

Side & Rear flail Safety Section 1-3SAFETYDANGER!Never operate the Tractor or Implement until you have read andcompletely understand this Manual

MAINTENANCESide and Rear Flail Maintenance Section 4-2©2011 Alamo Group Inc.MAINTENANCE General InstructionsTiger Mowers are designed for high perf

MAINTENANCESide and Rear Flail Maintenance Section 4-3©2011 Alamo Group Inc.MAINTENANCERegular Maintenance The intervals at which regular servicing sh

MAINTENANCESide and Rear Flail Maintenance Section 4-4©2011 Alamo Group Inc.MAINTENANCEITEM SERVICE COMMENTSHydraulic Fluid Level Check Add if require

MAINTENANCESide and Rear Flail Maintenance Section 4-5©2011 Alamo Group Inc.MAINTENANCEYEARLY OR EVERY 500 HOURSITEM SERVICE COMMENTSHydraulic Tank Fl

MAINTENANCESide and Rear Flail Maintenance Section 4-6©2011 Alamo Group Inc.MAINTENANCETROUBLESHOOTINGSYMPTOMS CAUSE REMEDYVibration 1. Loose Bolts 1.

MAINTENANCESide and Rear Flail Maintenance Section 4-7©2011 Alamo Group Inc.MAINTENANCE5c. Remove large nut on side of large valve block. Rem

MAINTENANCESide and Rear Flail Maintenance Section 4-8©2011 Alamo Group Inc.MAINTENANCEThese are intended to be general specifications. See tractor op

MAINTENANCESide and Rear Flail Maintenance Section 4-9©2011 Alamo Group Inc.MAINTENANCETORQUE SPECIFICATIONS

MAINTENANCESide and Rear Flail Maintenance Section 4-10©2011 Alamo Group Inc.MAINTENANCERECOMMENDED FILLING INSTRUCTIONS FOR HYDRAULIC RESERVIORSWhen

MAINTENANCESide and Rear Flail Maintenance Section 4-11©2011 Alamo Group Inc.MAINTENANCEREPLACEING HIGH PRESSURE HYDRAULIC FILTER ELEMENT:Assure syste